NAS QNAP TDS-16489U-SF3-R2

CPU

E5-2630 v4 10-core 2.2 GHz processor x2

*Available with customization requirement

CPU Architecture

64-bit x86

Floating Point Unit

Yes

Encryption Engine

Yes (AES-NI)

System Memory

256GB RDIMM DDR4 (8 x 32 GB)

Maximum Memory

RDIMM/LRDIMM: 1 TB (16 x 64 GB)

Memory Slot

16 x Long-DIMM DDR4

You can only use one type of dual in-line memory module (DIMM) at a

time. Do not use registered DIMM (RDIMM) with load-reduction DIMM

(LRDIMM) memory.

For the memory installation guidelines, see chapter 5 of the

TDS-16489U User Guide.

Flash Memory

4GB (DOM for dual OS)

Drive Bay

Front: 16 x 3.5-inch Rear: 4 x 2.5-inch

Drive Compatibility

3.5-inch bays:

3.5-inch SATA/SAS hard disk drives

2.5-inch SATA/SAS hard disk drives

2.5-inch SATA/SAS solid state drives

2.5-inch bays:

2.5-inch SATA/SAS solid state drives

Hot-swappable

Yes

SSD Cache Acceleration Support

Yes

Gigabit Ethernet Port (RJ45)

2

For a list of compatible network adapters, please visit the

Compatibility List.

For instructions on how to install network adapters, please refer to

Chapter 6 of the QNAP NAS Hardware Manual.

10 Gigabit Ethernet Port

4 x 10GbE SFP+

Jumbo Frame

Yes

PCIe Slot

4 (3 x PCIe Gen3 x8, 1 x PCIE Gen3 x16)

USB 3.0 port

4

IPMI

1

Form Factor

LED Indicators

3U Rack Mount

HDD 1-16, Status, 10 GbE, LAN, storage expansion port status

Buttons

Power, Reset

Dimensions (HxWxD)

130.8 × 444 × 744 mm

Weight (Net)

22.42 kg

Weight (Gross)

30.19 kg

Operating temperature

0 - 40 °C (32°F - 104°F)

Relative Humidity

5~95% RH non-condensing, wet bulb: 27˚C (80.6˚F)

Power Supply Unit

Redundant/ Hot Swap ATX Power Supply,Input:

50-60 Hz

100-127V~/ 8.5A

200-240V/ 4.2A

Output: 650W

Power Consumption: HDD Sleep

Mode

254.21 W

Power Consumption: Operating

Mode, Typical

362.86 W

Fan

Sound Level

4 x 6cm smart cooling fan (12V DC)

37.8 db(A)